Icom VE-PG4 Operating Guide ver.1.36 - Page 183
Transceiver Control , PTT Always-ON, No PTT Control, Always Receive, PC CMD
![]() |
View all Icom VE-PG4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 183 highlights
7 Connection Port Settings EXT I/O (EXT) screen Connection Port Settings > EXT I/O (EXT) ■■Transceiver Control Transceiver Model: General Setting These items are displayed when "Transceiver" is selected as a connected unit. (Connection Port Settings > EXT I/O (EXT) > EXT I/O Port Mode > EXT I/O 1 ~ 4 > Connected Unit) (Connection Port Settings > EXT I/O (EXT) > EXT I/O > EXT I/O Port) Edit the control settings for transceivers connected to the EXT1 ~ EXT4 ports. These items are displayed only when "Connection Unit" is set to "Transceiver." 1 2 3 4 5 6 7 8 9 LL2, 8 and 9 are displayed only when the Transceiver Model is set to "General Setting." LLOnly 5 and 6 are displayed when the Transceiver Model is set to "IC-SAT100." 1 Prioritized Receive Select "Enable" to keep receiving and inhibit the transmission, while the transceiver is receiving. The default value differs, depending on the Transceiver Mode. 2 PTT Control 3 Receive Detection ��� Select the audio transmission method. (Default: RTP) •• VOX: According to the input audio signal level. •• RTP: The RoIP Gateway sends the PTT control signal to the transceiver during receiving an applicable RTP packet. •• PTT Always-ON: T he RoIP Gateway always sends the PTT control signal to the transceiver to transmit. •• No PTT Control: T he RoIP Gateway does not send the PTT control signal to the transceiver. Select the received audio detection method. The default value differs, depending on the Transceiver Mode. •• VOX: According to the input audio signal level. •• SQL: According to the squelch status (Open/Close) When setting to "SQL," set also Pull-up Control ON or OFF. •• Always Receive: A lways in the receive mode. •• PC CMD: According to the PC command. (Displayed only when the Transceiver Model is set to "General Settings.") 4 Insert RX Audio to TX Audio Select "Enable" to mix the audio from the repeater with the audio from the telephone. (Default: Disable) LLWhen "Enable" is selected, select "Disable" in Prioritized Receive (1). 5 TX Volume Adjust the RoIP Gateway's transmitting audio level that is sent to the connected transceiver. (Default: 0) •• Range: -12 ~ +6 (dB) 7-29
![](/manual_guide/products/icom-vepg4-operating-guide-ver136-0267382/183.png)