Icom VE-PG4 Operating Guide ver.1.36 - Page 365
Constant Transmission during Call, Default: VOX
View all Icom VE-PG4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 365 highlights
13 PBX Extension Converter Bridge screen PBX Extension > Converter Bridge ■■ Control 12 13 14 15 LL"PTT-ON Tone" (13) and "PTT-OFF Tone" (14) are displayed only when "PTT Control Type" (12) is set to "DTMF." 12 PTT Control Type 13 PTT-ON Tone Sets the type of signal that SIP phones use to communicate for each call type or destination device type. (Default: VOX) •• VOX: When a voice signal is received from a SIP phone, the target transceiver enters the transmit mode. •• DTMF: When a tone signal is received from a SIP phone, the target transceiver enters the tranasmit mode. •• Constant Transmission during Call: As soon as communication is established, the target transceiver enters the tranasmit mode. The No Voice Release Timer detects only the signal (VOX or RTP) received from the Converter Bridge connection destination. LLWhen "Constant Transmission during Call" is selected, the No Voice Release Timer detects the communication status only by the received signal from the specified destination. (PBX Extension > Transceiver Controller Telephone Connection > Release Timer) If a signal from the specified destination is not received for the set period of time, the call may be terminated because of the No Voice Release Timer function. Select the PTT-ON tone when the either the signal types shown above (12) is set to "DTMF." (Default: 0) •• Range: 0 ~ 9, *, or # LLDial this number on the SIP phone to make a destination device start transmitting. LLIf you enter the same value to both the PTT-ON Tone and the PTT-OFF Tone, you can toggle the destination device status by dialing this number. 13-67