Icom VE-PG4 Operating Guide ver.1.36 - Page 369
the network., the VOX switch to turn OFF after no audio signal is received through
View all Icom VE-PG4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 369 highlights
13 PBX Extension Converter Bridge screen PBX Extension > Converter Bridge ■■Call Initiation Setting The VOX (voice operated transmission) function automatically switches the connected transceiver to receive, when the RoIP gateway receives the audio signal from the bridge connection destination device. 1 2 3 4 1 Attack Time 2 Release Time 3 Voice Delay 4 VOX Threshold Enter the TX attack time. It is the delay time before the VOX switch turns ON after an audio signal is received through the network. (Default: 1000) •• Range: 5 ~ 2000 (milliseconds) in 5 millisecond steps Select the RX delay time in 5 millisecond step. It is the delay time for the VOX switch to turn OFF after no audio signal is received through the network. (Default: 200) •• Range: 5 to 2000 (milliseconds) in 5 millisecond steps Set the audio signal buffer time to prevent intermittent audio. (Default: 5) •• Range: 0 ~ 500 (milliseconds) in 5 millisecond steps Set the voice threshold level. The audio signal is output to the network according to this threshold level. (Default: 70) •• Range: 0 ~ 100 (%) LLThe lower values make the VOX function more sensitive to the voice input. 13-71