Icom VE-PG4 Operating Guide ver.1.36 - Page 115

6 Transceiver Controller Transceiver Settings screen Transceiver Controller > Transceiver Settings > Transceiver Settings ■■Transceiver Settings 41 42 43 44 45 (This is an example of when the [Lone Worker] (42) is set to "Enable.") 41 Alert Tone Emergency: Enable 42 Lone Worker Emergency: Enable 43 Lone Worker ON Timer�� Lone Worker: Enable Select whether or not to cancel an Emergency call after the set period of time has passed. (Default: Enable) If you select "Enable," set the Volume (audio level) to between 0 and 32, and select the action. (Default: 32, Notification Beep+Vibration) LLIn the [Alert Tone Action], select "Notification Beep," "Vibration," or "Notification Beep + Vibration" to activate when an Emergency call is received. If the Lone Worker function is activated, the Emergency function is automatically turned ON after the set period of time has passed with no operation. (Default: Disable) Enter the period of time for starting the Lone Worker function.  (Default: 60 (minutes)) ••Range: 1 ~ 255 (minutes) in 1 second steps LLWhen the IP100H is operated within the period of time in this item, the times for [Lone Worker ON Timer] (43) and [Lone Worker Reminder Timer] (44) are reset. 6-44