Icom VE-PG4 Operating Guide ver.1.36 - Page 92

6 Transceiver Controller Transceiver Settings screen Transceiver Controller > Transceiver Settings > Transceiver Settings ■■Transceiver Settings Individually assign the functions, or set the receive notification tone to a registered IP100H. LLAfter the setting is completed, you must reboot the IP100H. 1 2 3 4 5 6 7 8 9 1 Unit ID 2 Display Item 3 BackLight 4 TX Inhibit Select the IP100H's Individual number (Name) that you want to edit. LLOnly the individual numbers of the IP100H are selectable. The individual number that the [Transceiver Model] on the [Transceiver Registration] screen is set to "IP100FS," cannot be selected. Select whether or not the IP100H displays the Date and Time or its Name in the standby mode. (Default: Date and Time) 10/8 16ɿ57 Sales 8 (Date and Time) Sales 1 Sales 8 (Name) LLIf the [Name] on the [Transceiver Registration] screen has not been entered, and this setting is set to [Name], the IP100H displays the individual number. Select the IP100H backlight function. (Default: Auto) •• OFF: The backlight does not light. •• ON: The backlight lights continuously. •• Auto: The backlight lights when an operation is performed, and goes out after 5 seconds. Select "Enable" to inhibit the IP100H's transmission. (Default: Disable) LLWhen this setting is set to "Enable," the IP100H also cannot transmit with an optional microphone, or using the VOX function. 6-21