Icom VE-PG4 Operating Guide ver.1.36 - Page 180
Enter a destination RoIP Gateway's IP address
View all Icom VE-PG4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 180 highlights
7 Connection Port Settings EXT I/O (EXT) screen Connection Port Settings > EXT I/O (EXT) ■■ Transceiver Connection Transceiver Model: General Setting These items are displayed when "Transceiver" is selected as a connected unit. (Connection Port Settings > EXT I/O (EXT) > EXT I/O Port Mode > EXT I/O 1 ~ 4 > Connected Unit) (Connection Port Settings > EXT I/O (EXT) > EXT I/O > EXT I/O Port) 25 Server Address Enter a destination RoIP Gateway's IP address. 26 Server Port Number ��� Enter a destination RoIP Gateway's port number between 1024 and 65535. (Default: EXT1=50000, EXT2=50001, EXT3=50002, EXT4=50003) 27 Baud Rate Select the serial communication baud rate between a device and the RoIP Gateway. (Default: 9600) 28 Data Bits Select the number of bits for serial communication. (Default: 8) 29 Parity Select the parity bit. (Default: none) 30 Stop Bits Select the stop bit length. (Default: 1) 31 Flow Control Select the Flow control option. (Default: None) 32 Connection Status ��� Click to connect or disconnect the transceiver, or to refresh the connection status. LLThe buttons are grayed out when Connected Repeater's Address is blank. LLThe settings cannot be changed while connection is established. Click before changing the settings on this screen. 33 Session Timer Set the time to cut the TCP session when there is no communication from the host. (Default: 30) 7-26