Icom VE-PG4 Operating Guide ver.1.36 - Page 217
Transceiver Connection , Default for RoIP Gateway6: 51010
View all Icom VE-PG4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 217 highlights
7 Connection Port Settings RoIP Gateway screen Connection Port Settings > RoIP Gateway ■■Transceiver Connection Mode: Transceiver Displayed when the RoIP Gateway Mode is set to "Transceiver" to the selected RoIP Gateway Port. 1 2 3 4 1 Destination Address �� 2 Voice Port Number ��� 3 Control Port Number �� 4 Connection Status���� Enter the IP Address of the connected transceiver. Enter the Voice Port Number of the connected transceiver. LLEnter a port number between 2 and 65534, in even number, except some reserved port numbers. LLDo not conflict with the other port settings. (Default for RoIP Gateway1: 51000 Default for RoIP Gateway2: 51002 Default for RoIP Gateway3: 51004 Default for RoIP Gateway4: 51006 Default for RoIP Gateway5: 51008 Default for RoIP Gateway6: 51010 Default for RoIP Gateway7: 51012 Default for RoIP Gateway8: 51014) Enter the Control Port Number of the connected transceiver. LLEnter a port number between 1 and 65534, except some reserved port numbers. LLDo not conflict with the other port settings. (Default: 53000) Displays the connection status to the transceiver that is entered in Destination Address (1). Click to start connecting to the transceiver. LLWhile connecting and connected to the transceiver, the settings 1 ~ 3 are grayed out and cannot be edited. Click to refresh the status. Click to disconnect and edit the Transceiver Connection settings. 7-63