Icom VE-PG4 Operating Guide ver.1.36 - Page 200
Default: EXT1=50000, EXT2=50001, Client Mode: Disable
View all Icom VE-PG4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 200 highlights
7 Connection Port Settings EXT I/O (EXT) screen Connection Port Settings > EXT I/O (EXT) ■■EXT Output Settings Client Mode: Disable 6 7 8 9 10 11 12 13 14 15 16 17 LLThe screen shows Serial Communication (6) is set to "Enable," and Client Mode (7) is set to "Disable." LL12 ~17 are displayed only when the Data Mode (11) is set to "Manual." Client Mode: Enable 6 7 18 19 9 10 12 13 14 15 16 20 LLThe screen shows Serial Communication (6) and Client Mode (7) is set to "Enable." 4 Serial Communication �� 5 Client Mode 6 TCP Port Number 7 Communication Control � Select "Enable" to use serial communications. (Default: Disable) *Items 7 ~ 11 are displayed when "Enable" is selected. Select "Enable" to set the RoIP Gateway as the client in serial communications. (Default: Disable) LLWhen Enabling this the Client Mode, enter the Server Address (18) and the Server Port number (19). Enter a port number between 1024 and 65535. (Default: EXT1=50000, EXT2=50001, EXT3=50002, EXT4=50003) Select the communication type. (Default: Full-Duplex) LLAutomatically set to "Full-Duplex" when Switching Control (3) is set to "Relay Circuit." 7-46