Icom VE-PG4 Operating Guide ver.1.36 - Page 113

6 Transceiver Controller Transceiver Settings screen Transceiver Controller > Transceiver Settings > Transceiver Settings ■■Transceiver Settings 33 34 35 36 37 38 39 40 LL(This is an example of when the Emergency (33), Emer SW OFF (36), and Cancel by Time (40) are set to "Enable.") 33 Emergency 34 Assign Emergency to Log Key (long press) �� Emergency: Enable 35 Emer SW ON Timer ��� Emergency: Enable 36 Emer SW OFF Emergency: Enable Select whether or not to use the Emergency function. (Default: Disable) Holding down the [Option Key] (20) or [Assign Emergency to Log Key (long press)] (34) until "Emergency" is displayed turns ON the Emergency function, and sends an Emergency call to the previously set User ID. The Emergency call is canceled when an RX code is received, or holding down the [Option] key or [Log] key for a set period of time in the [Emer SW OFF Timer] (36). ••The period of time that the key must be held down to turn the Emergency function ON or OFF is set in the [Emer SW ON Timer] (35) or in the [Emer SW OFF Timer] (36). Select whether or not to use the [ ] key to send an Emergency call.  (Default: Enable) Enter the period of time for which the [Option] key or [Log] key must be held down to turn the Emergency function ON. (Default: 5 seconds) Select whether or not to cancel the Emergency call by pushing the [Option] key or [Log] key. (Default: Disable) When "Enable" is selected, enter the period of time for which the [Option] or [Log] key must be held down to turn OFF the Emergency function, between 1 and 10 seconds. (Default: 2 seconds) 6-42