Icom VE-PG4 Operating Guide ver.1.36 - Page 114
When Enable is selected, set the [Emergency Alert Tone Volume], Default: All
![]() |
View all Icom VE-PG4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
6 Transceiver Controller Transceiver Settings screen Transceiver Controller > Transceiver Settings > Transceiver Settings ■■Transceiver Settings 33 34 35 36 37 38 39 40 37 Emergency Alert Tone �� Emergency: Enable 38 Call type Emergency: Enable 39 Cancel on Reply Emergency: Enable 40 Cancel by Time Select whether or not to sound an alarm when an Emergency call is sent. When this item is set to "Disable," "Emergency" is not displayed on the screen, and IP100H sends the Emergency call. (Default: Enable) When "Enable" is selected, set the [Emergency Alert Tone Volume] (audio level) of the alarm to between 0 and 32. (Default: 32) Select the call type of Emergency call from Individual, Group, All, or Telephone. (Default: All) If you select "Individual" or "Group," enter the Destination ID between 00001 to 60000. If you select "Telephone," enter a Destination Phone Number of up to 31 characters (0-9, #, and *). Select whether or not to cancel the Emergency call when any RX code is received. (Default: Enable) Select whether or not to cancel the Emergency call after the set period of time has passed. (Default: Disable) If you select "Enable," enter a period of time to between 1 and 255 seconds. (Default: 60 (seconds)) 6-43
![](/manual_guide/products/icom-vepg4-operating-guide-ver136-0267382/114.png)