Icom VE-PG4 Operating Guide ver.1.36 - Page 166
Digital Transceiver Connection 
![]() |
View all Icom VE-PG4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 166 highlights
7 Connection Port Settings Digital Transceiver (D-TRX) screen Connection Port Settings > Digital Transceiver (D-TRX) ■■Digital Transceiver Connection System: dPMR Mode 2 Configure the digital transceiver to connect to the RoIP Gateway. You can connect maximum of 4 digital transceivers through the network. 1 2 3 4 5 6 7 8 9 10 11 12 LLThe above screen shows an example for connecting the IC-FR5000 (with UC-FR5000 installed) to Digital Transceiver 1 (D-TRX1). LLThe above screen shows when the Digital Frame Packet (5) and Scrambler (11) are set to "Enable," and Specify TX CC (10) is checked. 1 Connected Repeater's Address Enter the UC-FR5000's IP address. 2 TCP Port Number (Connection Port Enter the Connection Receive Port number that is set in the UC-FR5000. Do not duplicate the other port number. (Default: Digital Transceiver 1 (D-TRX1): 41200 Digital Transceiver 2 (D-TRX2): 41201 Digital Transceiver 3 (D-TRX3): 41202 Digital Transceiver 4 (D-TRX4): 41203) •• Range: 1 ~ 65535 3 UDP Port Number (Data Port Enter the Data Receive Port number that is set in the UC-FR5000. Do not duplicate the other port number. (Default: Digital Transceiver 1 (D-TRX1): 41220 Digital Transceiver 2 (D-TRX2): 41221 Digital Transceiver 3 (D-TRX3): 41222 Digital Transceiver 4 (D-TRX4): 41223) •• Range: 1 ~ 65535 4 Connection Key Code �� Enter the Key Code that is set in the UC-FR5000. (Default: ucfr5000) 7-12
![](/manual_guide/products/icom-vepg4-operating-guide-ver136-0267382/166.png)