Icom VE-PG4 Operating Guide ver.1.36 - Page 61

5 Bridge Connection Settings Bridge Connection screen Bridge Connection Settings > Bridge Connection ■■Bridge Connection Unicast mode 1 2 3 4 5 6 7 9 10 LLThe above example shows when the Bridge Connection Destination (2) is set to "Custom Bridge Connection." Multicast mode 1 2 3 8 9 10 7 Source Port Number ��� Set the port number to receive the audio signal. •• Range: An even number from 1024 to 65534. LLThis setting is also used to the source port number to transmit the audio signal. LLFor communication, the set port number (RTP) and the set port number +1 (RTCP) are used. LLDo not duplicate other connection port settings, when using in the Unicast mode. LLThe default settings differ, depending on the EXT I/O Port Mode setting. (Connection Port Settings > EXT I/O (EXT) > EXT I/O Port Mode) The Default port settings in the Unicast mode Options Digital Transceiver 1 (D-TRX1) Digital Transceiver 2 (D-TRX2) Digital Transceiver 3 (D-TRX3) Digital Transceiver 4 (D-TRX4) EXT Input 1 (EXT1) / EXT I/O 1 (EXT1) EXT Output 1 (EXT1) EXT Input 2 (EXT2) / EXT I/O 2 (EXT2) EXT Output 2 (EXT2) EXT Input 3 (EXT3) / EXT I/O 3 (EXT3) EXT Output 3 (EXT3) EXT Input 4 (EXT4) / EXT I/O 4 (EXT4) Default 23000 23002 23004 23006 23100 23102 23104 23106 23108 23110 23112 Options EXT Output 4(EXT4) Emergency Notification Microphone (MIC) RoIP Gateway1 RoIP Gateway2 RoIP Gateway3 RoIP Gateway4 RoIP Gateway5 RoIP Gateway6 RoIP Gateway7 RoIP Gateway8 Default 23114 23116 23150 24300 24302 24304 24306 24308 24310 24312 24314 5-7