Icom VE-PG4 Operating Guide ver.1.36 - Page 223

8 Destination Settings SelCall Number Converting screen Destination Settings > SelCall Number Converting ■■About the SelCall Number Converting When a SelCall number is shared beyond the site, you can't call transceivers across the site due to "SelCall number duplication." The SelCall Number Convert function solves this problem by automatically converting the SelCall number. Here is an example to show how the function works. The transceiver (ID number: 1) in Area A is calling the transceiver (ID number: 2) in Area B using a provisionally assigned SelCall number (9002). The provisionally assigned SelCall number is converted into the actual one (9002 to 2), according to the number conversion table. Therefore, they can talk to each other across the sites. At the same time, the ID number of the transceiver in Area A is also converted, based on the list of SelCall Number Converting entries registered in Area A's RoIP Gateway (1 to 8001). The converted number (8001) is displayed on the transceiver in Area B. Area A VE-PG4 ʢ192.168.0.1ʣ Repeater A IC-FR5000 ʢ192.168.0.2ʣ P0 P1 P2 P3 P4 [D-TRX1] [LAN] IP Network Area B [D-TRX1] VE-PG4 ʢ192.168.0.3ʣ [LAN] Repeater B IC-FR5000 ʢ192.168.0.4ʣ P0 P1 P2 P3 P4 ID number: 1 ID number: 2 (Provisional number: 8001) (Provisional number: 8002) ID number: 1 ID number: 2 (Provisional number: 9001) (Provisional number: 9002) ••The conversion table for the above example. (Area A) ••The conversion table for the above example. (Area B) LLWe do not recommend using duplicate individual numbers between bases. LLYou need to register both entries of the destination information and the source information. 8-3