Intermec PX4i PX4i and PX6i High Performance Printer User's Manual - Page 126

Print Quality Problems and Possible Solutions continued, Cleaning the Printhead - replace ribbon

Get Intermec PX4i PDF manuals and user guides View all Intermec PX4i manuals
Add to My Manuals
Save this manual to your list of manuals

Page 126 highlights

Chapter 4 - Troubleshooting and Maintaining the Printer Print Quality Problems and Possible Solutions (continued) Problem Possible Solution There are weak spots on the printout. Try these possible solutions in order: • There may be foreign particles on the media. Clean or replace the media. • Make sure that your media and ribbon are compatible. • Make sure that you are using high quality media and ribbon. • The contrast may be too low. Try increasing the contrast. • The printhead may be worn. Replace the printhead. For help, see "Replacing the Printhead" on page 130. • The platen roller may be worn. For help, contact your Intermec service representative. The printout is dark, overall. Try these possible solutions in order: Or, There is excessive bleeding on the media. • Make sure that your media setting is appropriate for the type of media you are using. • The contrast may be too high. Try decreasing the contrast. • The printhead pressure may be too high. Decrease the printhead pressure. For help, see "Adjusting the Printhead Pressure" on page 123. • The printhead voltage may be incorrect or the energy control may be faulty. For help, contact your Intermec service representative. There are dark lines along the media There may be foreign particles on the printhead. Clean the path. printhead. For help, see "Cleaning the Printhead" on page 128. There are white vertical lines on the Try these possible solutions in order: printout. • There may be foreign particles on the printhead. Clean the printhead. For help, see "Cleaning the Printhead" on page 128. • There may be missing dots on the printhead. Replace the printhead. For help, see "Replacing the Printhead" on page 130. Part of a dotted line is missing. Try these possible solutions in order: • The printhead may be failing. Replace the printhead. For help, see "Replacing the Printhead" on page 130. • The strobe signal may be failing. For help, contact your Intermec service representative. 112 PX4i and PX6i High Performance Printer User's Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
Chapter 4 — Troubleshooting and Maintaining the Printer
112
PX4i and PX6i High Performance Printer User’s Manual
There are weak spots on the
printout.
Try these possible solutions in order:
•
There may be foreign particles on the media. Clean or
replace the media.
•
Make sure that your media and ribbon are compatible.
•
Make sure that you are using high quality media and
ribbon.
•
The contrast may be too low. Try increasing the contrast.
•
The printhead may be worn. Replace the printhead. For
help, see
“Replacing the Printhead” on page 130
.
•
The platen roller may be worn. For help, contact your
Intermec service representative.
The printout is dark, overall.
Or,
There is excessive bleeding on the
media.
Try these possible solutions in order:
•
Make sure that your media setting is appropriate for the
type of media you are using.
•
The contrast may be too high. Try decreasing the
contrast.
•
The printhead pressure may be too high. Decrease the
printhead pressure. For help, see
“Adjusting the
Printhead Pressure” on page 123
.
•
The printhead voltage may be incorrect or the energy
control may be faulty. For help, contact your Intermec
service representative.
There are dark lines along the media
path.
There may be foreign particles on the printhead. Clean the
printhead. For help, see
“Cleaning the Printhead” on
page 128
.
There are white vertical lines on the
printout.
Try these possible solutions in order:
•
There may be foreign particles on the printhead. Clean
the printhead. For help, see
“Cleaning the Printhead”
on page 128
.
•
There may be missing dots on the printhead. Replace the
printhead. For help, see
“Replacing the Printhead” on
page 130
.
Part of a dotted line is missing.
Try these possible solutions in order:
•
The printhead may be failing. Replace the printhead. For
help, see
“Replacing the Printhead” on page 130
.
•
The strobe signal may be failing. For help, contact your
Intermec service representative.
Print Quality Problems and Possible Solutions (continued)
Problem
Possible Solution