Intermec PX4i PX4i and PX6i High Performance Printer User's Manual - Page 96
Notification method, Submit Settings, Understanding the Alert Settings, Setting, Description - ribbon sensor error
View all Intermec PX4i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Chapter 3 - Configuring the Printer 3 Select the Notification method. 4 Click Submit Settings. Use the following table to understand the Alert Settings. Understanding the Alert Settings Setting Description Label Not Taken Sent when the printed label is not taken from the (Fingerprint only) printer. This setting applies to label and ticket media and requires an optional label taken sensor. Cutter Error There was an error related to the label cutter. Head Lifted A printer job was sent to the printer while the printhead was lifted. Out of Ribbon You have thermal transfer ribbon selected and the printer is out of ribbon. Pause Mode The printer is in Pause mode. Setup Mode The printer is in Setup mode. Error Condition An error has occurred in the Fingerprint application. (Fingerprint only) The error does not have to be critical to the print job for the printer to send this alert. Application Break A running Fingerprint application has been (Fingerprint only) interrupted manually or because of an error. Print Job Complete The print job has been successfully completed. (Fingerprint only) Odometer Count 1 The amount of media printed has reached a preset amount, measured in meters or in number of labels. The Delay repeat setting represents how often the alert message will be sent when the preset value is reached. Notification Method The method used to send an alert message. You can choose from mail, SNMP-trap, or both. 82 PX4i and PX6i High Performance Printer User's Manual