Intermec PX4i PX4i and PX6i High Performance Printer User's Manual - Page 155
USB Interface, Connecting the Printer to a PC, Through the USB Device Port - driver
View all Intermec PX4i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 155 highlights
Appendix A - Specifications Serial Cable Pins and Description (continued) Pin Signal 7 CTS 8 RTS 9 Description Clear to send Request to send USB Interface The printer supports USB full speed v2.0 Host. To use the USB interface to print from a PC, you need to have the Intermec InterDriver printer driver installed on your PC. For help setting up USB communications, see "Connecting the Printer to a PC Through the USB Device Port" on page 57. The printer is a "self-powered device." Intermec recommends that you only connect one printer to each USB port on the PC, either directly or through a hub. You can connect other devices, such as a keyboard or a mouse, to the same hub. If you need more than one USB printer to a host, you should use different USB ports. The USB cable that ships with the printer has a USB Type A connector on one end to connect to the PC and a USB Type B connector on the other end to connect to the printer. You do not need to configure communications for the USB port. USB Type A Connector USB Type B Connector PX4i and PX6i High Performance Printer User's Manual 141