Intermec PX4i PX4i and PX6i High Performance Printer User's Manual - Page 169

Appendix A - Specifications Accessories for the Printer You can use these accessories (sold and ordered separately) with the printer. To order accessories, contact your local Intermec sales representative. Liner/Batch Takeup This factory-installed option separates labels from the liner and winds up the spent liner inside the printer's media compartment. For more information on using the liner/batch takeup, see "Loading Media for Internal Batch Takeup Printing" on page 32. Paper Cutter Use the paper cutter to cut through continuous non-adhesive paperbased media or the liner between labels. If you are running Fingerprint or Direct Protocol, you can control the paper cutter using the commands CUT, CUT ON, and CUT OFF. For help, see the Intermec Fingerprint Command Reference Manual. Media Roll Retainer Use the media roll retainer with a rotating media supply hub to keep large media rolls in place. 76 mm (3-in) Adapter Use the 76 mm (3-in) adapter with a rotating media supply hub to use media rolls with 76 mm (3-in) inner diameter cores. The adapter cannot be used with a media supply roll post. Internal Fanfold Guides Use the internal fanfold guides to facilitate loading media from an external supply. The internal fanfold guide cannot be used in peel-off (self-strip) mode or with the label slack absorber. Label Taken Sensor The label taken sensor (LTS) is a photoelectric sensor that enables the printer's firmware to detect if the last printed label, ticket, tag, etc. has been removed before printing another copy. The LTS cannot be used with a paper cutter. PX4i and PX6i High Performance Printer User's Manual 155