Intermec PX4i PX4i and PX6i High Performance Printer User's Manual - Page 83
Connecting the Printer, PX4i and PX6i High Performance Printer User's Manual
View all Intermec PX4i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Chapter 2 - Connecting the Printer 2 Send one of the following commands to enable WPA-802.1x or WPA2-802.1x authentication. You should also send the WPA_PSK command that does not contain a value: ws,WPA,OFF ws,WPA2,ON ws,WPA_PSK, 3 Send these commands to configure the EAP_TYPE: ws,EAP_TYPE,xxxx where xxxx can be OFF, LEAP, PEAP, TTLS, or EAP-FAST. ws,.EAP_USER,xxxx ws,EAP_PASS,xxxx where xxxx is the unique username and the unique password for this protocol. 4 If you are using TTLS, you may need to send this command to set the TTLS outer name: ws,TTLS_USER,xxxx where xxxx is the outer name. 5 If you are using EAP-FAST, you can use PAC and ACQUIRE_PAC commands. The PAC setting specifies the PAC file to use for EAPFAST authentication. The ACQUIRE_PAC setting checks to see if automatic PAC file provisioning is enabled. You can set ACQUIRE_PAC to on or off. • Send the following command to set PAC to use /tmp/my.pac with a pass phrase of "verysecret": ws,PAC,/tmp/my.pac@verysecret • Send the following command to set ACQUIRE_PAC to on: ws,ACQUIRE_PAC,ON PX4i and PX6i High Performance Printer User's Manual 69