Intermec PX4i PX4i and PX6i High Performance Printer User's Manual - Page 164
Tickets With Gaps Gap Stock, LSS Detection Position c, Detection Slit Length d, Media Width
View all Intermec PX4i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 164 highlights
Appendix A - Specifications Tickets With Gaps (Gap Stock) Media Width (a) Printer PX4i PX6i Measurement Maximum Minimum Maximum Minimum Value 120 mm (4.72 in) 25.0 mm (1.00 in) 170 mm (6.69 in) 76.0 mm (3.00 in) Copy Length (b) Measurement Value Minimum without LTS 8 mm (0.32 in) Minimum with LTS 12 mm (0.47 in) Maximum 6,143 mm (241 in) Depends on SDRAM size. Note: Under ideal circumstances, a minimum ticket length of 4 mm (0.16 in) could be used. It requires the sum of the copy length (b) and the detection slit height (e) to be larger than 7 mm (0.28 in), that batch printing is used, and that no pull back of the media is performed. Intermec does not guarantee that such short tickets will work, but it is up to users to test this in their unique application. LSS Detection Position (c) This position is variable. For help, see "Adjusting the Label Stop Sensor" on page 119. Detection Slit Length (d) The length of the detection slit (excluding corner radii) must be a minimum of 2.5 mm (0.10 in) on either side of the LSS detection position (c). Detection Slit Height (e) Measurement Maximum Recommended Minimum Value 25.0 mm (0.98 in) 1.6 mm (0.06 in) 1.2 mm (0.05 in) 150 PX4i and PX6i High Performance Printer User's Manual