Intermec PX4i PX4i and PX6i High Performance Printer User's Manual - Page 72
Connecting the Printer to Your Network, Setting Up Ethernet Communications - ip
View all Intermec PX4i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Chapter 2 - Connecting the Printer If you are using a parallel port to communicate with the printer, you need: • an IEEE 1284 interface adapter installed in the printer. If you do not have the parallel interface installed in your printer, you can purchase the field installable option and have it installed by an authorized Intermec service technician. For help, contact your Intermec representative. • a parallel cable to run between the printer and the PC. To connect your printer to a PC parallel port • Connect the IEEE 1284 cable connector to the interface adapter port on the back of the printer and connect the other end of the cable into a parallel port on the PC. Connecting the Printer to Your Network You can connect your printer to your network using the: • integrated Ethernet interface. • optional 802.11 wireless interface. These network interfaces provide features such as security, FTP server, web server, and Alert handling. Setting Up Ethernet Communications Use the Ethernet port to set up the PX4i or PX6i as a network printer. If Ethernet is selected as your Network Type, when you turn on your printer, it automatically retrieves an IP address from the network (DHCP+BOOTP). You can use the network connection with LabelShop or the Intermec InterDriver. You can also use this connection to send commands directly to the printer through a terminal connection (Telnet) or FTP. 58 PX4i and PX6i High Performance Printer User's Manual