Intermec PX4i PX4i and PX6i High Performance Printer User's Manual - Page 22
Loading Media for Tear-Off Printing, Using the Printer - label printer
View all Intermec PX4i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Chapter 1 - Using the Printer • Peel-off (self-strip) • Cut-off • Batch take-up • External supply • RFID If you are using Fingerprint, use the F key to load the same type of media. If you change the media type, or if the printer does not feed the media properly, simultaneously press the S and F keys to perform a "testfeed." If you are using IPL, save the label with the sensitivity number attached to the media roll. You need this number to set the media sensitivity. Loading Media for Tear-Off Printing In tear-off, or straight-through, printing mode, you manually tear off the media against the printer's tear bar. In tear-off mode, use these types of media: • Non-adhesive continuous stock • Self-adhesive continuous stock with liner • Self-adhesive labels with liner • Tickets with gaps (gap stock), with or without perforations • Tickets with black marks (mark stock), with or without perforations You can also install an optional label taken sensor so that the next copy in the batch is not printed until the current copy is removed. For more information, see "Accessories for the Printer" on page 155. If you are running Fingerprint, use the F key to load the same type of media. If you switch to a new type of media, or if the printer does not feed out the media properly, simultaneously press the S and F keys to perform a "testfeed." If you are running IPL, save the label indicating the sensitivity number attached to the media roll. You need this number to set the media sensitivity. 8 PX4i and PX6i High Performance Printer User's Manual