Intermec PX4i PX4i and PX6i High Performance Printer User's Manual - Page 131
Resetting the Printer, language Fingerprint, IPL, ZSim, or DSim. - factory reset
View all Intermec PX4i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 131 highlights
Chapter 4 - Troubleshooting and Maintaining the Printer Resetting the Printer When you reset the printer, you return it to the factory default settings. Resetting the printer removes all files used to store settings. But, it does not reset settings that have already been read when the files. So, wireless communication settings, such as SSID and keys retain their values from the previous start. However, the next reboot resets them to the factory default values. Resetting the printer also does not change the selected printer language (Fingerprint, IPL, ZSim, or DSim). There are two ways to reset the printer: • Insert a special CompactFlash memory card and restart the printer. • Use the printer's keypad. To reset the printer using the keypad 1 Turn off the printer. 2 Open the right cover and lift the printhead. 3 Turn on the printer and press and hold the I key until the printer beeps. 4 Quickly press the following keys in sequence: D U U L The following message appears: Factory Default? Enter=Yes ESC=No 5 Within 10 seconds, press E to reset the printer to its factory default settings. The parameters are reset and the printer continues the normal startup process. If you do not press E within 10 seconds, the normal startup continues and the printer is not reset. PX4i and PX6i High Performance Printer User's Manual 117