Kyocera KM-2540 Fax System (P) Operation Guide Rev-1 - Page 157

System Menu / Counter System Menu Copy Default FAX Default Machine Default L a ngua ge MP Tray Setting Register Orig. Size System Menu / Counter Scan from Doc.P. Sta ndar d size L ong or i gi nal Setting the Document Size for Scanning from the Document Processor (Scan from DP setting) Select here whether documents that are set in the Document Processor will be scanned as 8 1/2 × 11" [A4R] or other such standard size paper, or as long documents (in the direction of the paper feed). Note It is necessary to select Standard size here when transmitting both sides of duplex (2-sided) documents. (Refer to Sending 2-Sided Documents (Duplex Transmission) on page 3-3.) If you select Long original (Long orig.) here, it will not be possible to have documents rotated for transmission. (Refer to Rotating the Document Image for Transmission (Rotate & Transmit function) on page 1-14.) If you want to cancel the procedure part way through, press the Reset key. The touch panel will return to the initial mode settings. 1 Press the System Menu/Counter key. The System Menu / Counter screen will appear. 2 Press the [Fax Default] key. 3 Press the [T] key until Scan from Doc. P. (Doc. P. scanning) is highlighted. Job Accoun 4 Press the [Change #] key. Print Report 5 Select the desired original size setting by pressing either the [Standard size] key or the [Long original] ([Long orig.]) key, as Ba appropriate. 6 Press the [Close] key. If you are finished making settings, press the Reset key to return to the initial mode. Various Settings and Registration 6-15