Kyocera KM-2540 Fax System (P) Operation Guide Rev-1 - Page 87

Option screen Select item. TX Polling RX Polling Sub.conf. box input Sub.conf. box output Print encr data box Basic Application Re se r v e d TX status TX result on LCD RX result on LCD Register TX Polling. Polling ID Enter using # key. 0000. ( 4 digits) TX Polling. Add orig./overwrite Add Ov er wr i te Print Report 3 Press the [TX Polling] key. If you are entering documents for this Polling Transmission for the first time, go to the next step. If you want to add documents to those which have already been saved into memory or replace them completely, go directly to step 6. > Entering documents for the first time 4 If you want to limit who can request transmission of the documents from your fax, use the numeric keys to enter a 4-digit Polling ID (the Ba self-station ID of the receiving fax). Note If you DO NOT want to designate any specific fax, do not enter a Polling ID here. If a Polling ID other than '0000' is entered, the receiving fax must be one of our models that has the corresponding capabilities. Even if you enter '0000', a check of Permit Fax Numbers, Permit IDs and Rejection Fax Numbers will be performed. 5 Press the [Confirm] key and then go directly to step 8. > Adding or replacing documents 6 If you want simply to add documents to those already in memory, press the [Add] key. If you want to delete all of the documents Ba currently in memory and replace them with new documents, press the [Overwrite] key. 7 Press the [Confirm] key. If you selected [Overwrite], the message display will return to the same screen as was displayed in step 4. 8 Select any related transmission settings that you want to use. Note If you are using duplex (2-sided) documents, press the [Duplex TX] key. Refer to Sending 2-Sided Documents (Duplex Transmission) on page 3-3 for setting procedures. 9 Press the Start key. The documents will be scanned and stored in memory where they will awaiting the polling request. Fax Operation (Advanced) 3-27