Kyocera KM-2540 Fax System (P) Operation Guide Rev-1 - Page 172

Ready for fax transmission. Place the original & assign destination. Dest Registering New Permit IDs Note You can register up to 5 numbers as Permit IDs in this fax. If you want to cancel the procedure part way through, press the Reset key. The touch panel will return to the initial mode settings. 1 Press the [Register] key. The Register screen will appear. Addr e ss book Basic Abbr ev . Application TX setting Register Registering item option screen. Select item for register. Print Report Dial L oca tion Info. Date & Time Box TX/RX Restr i ct. Fax F or wa r di ng Remote SW dial Remote Test ID Encr y pti o n key Basic Application Register Print Report Register in TX/RX Restriction list. Item option Permit FAX No. Permit ID No. Reject FAX No. 2 Press the [TX/RX Restrict.] key. 3 Press the [Permit ID No.] key. Register in TX/RX Restriction list. Permit List #01 0101. #02 0202. #03 #04 #05 5555. 4 Press an unregistered key. The information will be displayed for all keys that have already been registered. 5 Use the numeric keys to enter the desired 4-digit Permit ID. If you want to change the entered number, use the [] and/or [] keys to move the cursor to the desired location. 6 Press the [Confirm] key. The message display will return to the same screen as was displayed in step 4. If you want to continue registering other Permit IDs, repeat steps 4 through 6. If you are finished registering Permit IDs, press the Reset key. Modifying or Deleting Permit IDs Note If you want to cancel the procedure part way through, press the Reset key. The touch panel will return to the initial mode settings. 1 Perform steps 1 through 3 of Registering New Permit IDs on page 6- 30. 6-30 Various Settings and Registration