Kyocera KM-2540 Fax System (P) Operation Guide Rev-1 - Page 201
the F-Code Based Confidential Reception attempt., Box was attempted
View all Kyocera KM-2540 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 201 highlights
CODE U04401 U04500 U05100 U05200 U05300 U09000 U12000 U14000 U14100 U19000 U19100 U19200 U19300 U19400 CAUSE AND/OR PROCEDURE FOR CORRECTION Encryption Transmission was attempted, but the other party was not dialed because the designated Encryption Key is not registered in your unit. Encryption Reception was attempted, but was unsuccessful because the Encryption Keys did not match. Transmission was attempted, but was unsuccessful because TX/RX Restriction was turned ON in your unit and the necessary communication conditions were not met. Check with the destination party. A transmission was attempted by another party, but was unsuccessful because TX/RX Restriction was turned ON in your unit and the necessary communication conditions were not met. Transmission was attempted, but was unsuccessful because TX/RX Restriction was turned ON in the destination party's FAX and the necessary communication conditions were not met. Check with the destination party. Communication was attempted but, but was unsuccessful because the other party's FAX does not match the communication protocol in use (the other party is using a G2 facsimile). An F-Code Based Relay Broadcast Transmission command was received, but all the data to be transmitted was not received because the memory in your FAX machine has become full. Check the contents of your machine's memory and, after you have created sufficient space in memory, have the initial transmitting station perform the transmission operation again. A reception from an F-Code box was attempted, but was unsuccessful because the memory in your FAX machine has become full. Print out data from memory and try again or abandon the F-Code Based Confidential Reception attempt. The destination FAX is one of our models and a transmission to a destination party's F-Code Box was attempted, but was unsuccessful because memory in the destination party's FAX machine has become full. Memory Reception was attempted, but was unsuccessful because your memory has become full. Clear your memory of all other data and attempt reception again. Transmission was attempted, but was unsuccessful because the destination party's memory has become full. Check with the destination party. The data stored in memory is faulty. Perform the necessary communication procedures again. A transmission was attempted, but was unsuccessful because the data to be transmitted is faulty. Perform the transmission procedure again. A reception was attempted, but was unsuccessful because the received data is faulty. Perform the reception procedure again. Reference Information 8-13