Kyocera KM-2540 Fax System (P) Operation Guide Rev-1 - Page 175

Register in TX/RX Restriction list. Reject FAX numbers 002. Contents change/del. .12345678901234567890 Change contents Delete Register in TX/RX Restriction list. Reject FAX numbers 001. Detail contents Enter using # key. (MAX. 20 digits) .12345678901234567T8ra9y0 Delete 3 If you want to delete the registered Reject Fax Number, press the [Delete] key and then go to the next step. If you want to modify the Ba registered information, press the [Change contents] key and then go directly to step 5. > Deleting a Reject Fax Number 4 Press the [Yes] key. The message display will return to the same screen as was displayed in step 2. If you are finished deleting Reject Fax Numbers, press the Reset key. > Modifying information 5 Press the Stop/Clear key to delete the old number and then enter the new Reject Fax Number, or use the [I] and/or [J] keys to move Ba the cursor to a desired location and reenter the number as desired. Pressing the [Delete] key will delete the number directly above the cursor. 6 Press the [OK] key. The message display will return to the same screen as was displayed in step 2. Once you are finished modifying and/or deleting Reject Fax Numbers, press the Reset key. Turning TX/RX Restriction ON/OFF You can select to only allow fax transmission/reception to/from those facsimiles that are registered in your address book and those registered as Permit Fax Numbers and Permit IDs. If RX Restriction is set to Reject List, you can prohibit fax reception from numbers registered as Reject Fax Numbers, or from other party who does not register its local FAX Number in its own fax in advance. (Refer to Restricting Communication To/From Specific Destinations (TX/RX Restriction) on page 6-27.) Note If you want to cancel the procedure part way through, press the Reset key. The touch panel will return to the initial mode settings. 1 Press the System Menu/Counter key. The System Menu / Counter screen will appear. System Menu / Counter System Menu Copy Default FAX Default Machine Default L a ngua ge MP Tray Setting Register Orig. Size 2 Press the [Fax Default] key. 3 Press the [T] cursor key until TX/RX Restriction is highlighted. 4 Press the [Change #] key. Job Accoun Print Report Various Settings and Registration 6-33