Kyocera KM-2540 Fax System (P) Operation Guide Rev-1 - Page 167

Ready for fax transmission. Place the original & assign destination. Dest Registering the Remote Test ID (Remote Test ID setting) If you have entered into a contract with an authorized service center for their Remote Diagnosis service, it is necessary to register here in advance the Remote Test ID that they designate for you. Note A previously registered Remote Test ID can also be modified by performing the following procedure. If you want to cancel the procedure part way through, press the Reset key. The touch panel will return to the initial mode settings. 1 Press the [Register] key. The Register screen will appear. Addr e ss book Basic Abbr e v . Application TX setting Register Print Report Registering item option screen. Select item for register. Dial L oca tion Info. Date & Time Box TX/RX Re str i ct. Fax F o r war di ng Remote SW dial Remote Test ID Encr y pti on key Basic Application Register Print Report Enter Remote ID. Remote Test ID Enter using # key. 0000. ( 4 digits) 2 Press the [Remote Test ID] key. 3 Use the numeric keys to enter the designated 4-digit Remote Test ID. Ba Note If you want to revise the entered number, press the [] or [] cursor key to move the cursor to the number that you want to change. 4 Press the [Confirm] key. The message display will return to the same screen as was displayed in step 2. If you are finished making settings, press the Reset key to return to the initial mode. Various Settings and Registration 6-25