Kyocera KM-2540 Fax System (P) Operation Guide Rev-1 - Page 38

Ready for fax transmission. Original Image Normal Fine Super fine Ultra fine Half tone 2 Select the desired resolution from among the 5 available. Note The Fine and Super fine resolutions reproduce clearer images in comparison to transmission with the Normal resolution, but transmission time is longer. The Half tone [Half-tone] resolution reproduces grays clearly, but transmission time is longer than with the Normal or Fine resolutions. To transmit with the Ultra fine resolution, 32 MB of optional memory must be installed. If the additional memory is NOT installed, the Ultra fine resolution will not selectable. To transmit with the Super fine or Ultra fine resolutions, the receiving fax must have the corresponding resolution capabilities in order to benefit from their features. If the receiving fax does not have the corresponding capability, transmission will be accomplished with the Fine resolution. 6 Selecting the density It is possible to select a density from among the 3 available settings. Density Dark Regular Light Description For transmitting light documents at a darker contrast. For transmitting document with a normal contrast. For transmitting dark documents at a lighter contrast. Note The default setting is for Regular density. x transmission. mit lete Pause Space Subadd. Memory usage: .0% JUN-06-2007 16:00 Next des Dest. check Re-dial TX 8½×11" Original Size tion Register Normal Original Image Print Report Regular Density Mode On-hook Memory TX Auto RX Ready for fax transmission. Density setting 1 If you want to change the density, press the [Density Mode] key. 2 Select the desired density from among the 3 available. Dark Regular L i ght 7 Indicating the document size When you set any documents that you want to transmit on the platen, you will need to indicate the size of those documents. This procedure is not necessary when transmitting documents from the Document Processor. 2-6 Fax Operation (Basic)