Lexmark OptraImage Color 1200r User's Guide - Page 141
Cleaning the fuser coating roll, Open the rear cover.
View all Lexmark OptraImage Color 1200r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 141 highlights
Cleaning the fuser coating roll If toner adheres to the back of your page, particularly after a paper jam, cleaning the fuser coating roll may solve the problem. To clean the fuser coating roll: 1 Open the rear cover. 2 Slide the locking plate to the left to release the fuser coating roll. Caution! The fuser coating roll is very hot. Do not touch the roll with your hand. 3 Remove the fuser coating roll, as shown. Cleaning the fuser coating roll 127
127
Cleaning the fuser coating roll
Cleaning the fuser
coating roll
If toner adheres to the back of your page, particularly after
a paper jam, cleaning the fuser coating roll may solve the
problem.
To clean the fuser coating roll:
1
Open the rear cover.
2
Slide the locking plate to the left to release the
fuser coating roll.
Caution!
The fuser coating roll
is very hot. Do not touch the roll
with your hand.
3
Remove the fuser coating roll, as shown.