Lexmark OptraImage Color 1200r User's Guide - Page 90
Transparencies, Changing the Paper Type
View all Lexmark OptraImage Color 1200r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Transparencies For best results, use only the following Lexmark transparencies with the Optra Color 1200 printer: Recommended transparencies Part number 12A0541 12A0540 Size A4 Letter Notch These transparencies are designed to provide optimal print quality when used with your printer. Using other transparencies designed for laser printers may yield unpredictable results To order transparencies in the U.S., call 1-800-438-2468. In other countries, refer to the table on page 90 for a listing of appropriate phone numbers. Changing the Paper Type Always set the Paper Type to Transparency when printing transparencies. The printer then adjusts the fuser temperature and engine speed to ensure the best possible print quality. When you print transparencies, you will experience a slight delay before printing starts as the printer warms the fuser to the higher temperature. Transparencies then print at approximately 3 ppm. When you load transparencies in the multipurpose feeder, the printer recognizes the type of media you have loaded and automatically makes these adjustments. However, waiting for the printer to sense the presence of transparencies may further delay the job. We recommend always selecting the correct Paper Type before sending a job to print. 76 Chapter 5: Paper handling