Lexmark OptraImage Color 1200r User's Guide - Page 96
Tray linking, Make sure the rear paper guide is set to the proper
View all Lexmark OptraImage Color 1200r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Tray linking If you want to increase your printer's paper capacity, you can add up to two optional 250-sheet drawers to your printer. If you load the same paper size and type in more than one tray, the printer automatically links the trays: when one tray is empty, paper feeds from the other tray. By linking the trays, you can effectively create a single paper source that holds up to 850 sheets (depending on the options you have installed). To initiate tray linking: 1 Load paper of the same size and type in all the trays you want to link. 2 Make sure the rear paper guide is set to the proper position for the paper size you've loaded. The position of the rear paper guide informs the printer of the paper size loaded in the tray. If you want to link the multipurpose feeder to a tray, select the appropriate MP Feeder Size setting from the Paper Size menu. 3 Select the same Paper Type setting for all the sources. See page 18 or refer to the Setup Guide for more information about changing the Paper Type setting. With tray linking in effect, the printer feeds paper from one tray until it is empty, and then feeds paper from the next tray. To disable tray linking, change the Paper Type setting for one or more of the trays to a Custom Type setting. See page 18 for more information. 82 Chapter 5: Paper handling