Lexmark OptraImage Color 1200r User's Guide - Page 56
Parallel Mode 2, Honor Init
View all Lexmark OptraImage Color 1200r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Parallel Menu (continued) Menu item Advanced Status Values Off On* Protocol If Advanced Status is set On, bidirectional communication is enabled through the parallel interface. Standard Fastbytes* Honor Init You can select Standard or Fastbytes protocol for the parallel interface. Fastbytes is compatible with most existing parallel interface implementations. Use Standard only if you experience parallel interface problems. Refer to the Technical Reference for more information about the parallel interface. Off* On Parallel Mode 1 The Honor Init setting determines whether the printer honors hardware initialization requests from the computer. The computer requests initialization by activating the INIT signal on the parallel interface. Many personal computers activate the INIT signal each time the computer is turned on and off. Off On* Parallel Mode 2 This setting enables or disables the pull up resistors on the parallel port signals. It is useful for personal computers that have open collector outputs on the parallel port signals. Set Parallel Mode 1 On to disable the resistors or Off to enable the resistors. Refer to the Technical Reference for more information about this setting. Off On* *Factory default This setting determines if the parallel port data is sampled on the leading or trailing edge of strobe. If Parallel Mode 2 is set On, the parallel port data is sampled on the leading edge of strobe. The parallel port data is sampled on the trailing edge of strobe if Parallel Mode 2 is set Off. Refer to the Technical Reference for more information about this setting. 42 Chapter 2: Changing printer settings