Yamaha DM1000 Owner's Manual - Page 101
Aux Sends in Fixed mode, Input Channel and Aux inter then edit the Send level or turn the cur
View all Yamaha DM1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
Viewing Aux Send Settings for Multiple Channels 101 3 If you selected the PRE/POST button in Step 2, move the cursor to the desired Input Channel and Aux intersection, then press the [ENTER] button to change the signal source point. Note: You can switch between Pre and Post only for Aux Sends that are set to Variable mode. The "FIX" indication appears for Aux Sends that are set to Fixed mode, and you cannot switch Pre/Post. 4 If you selected the LEVEL button in Step 2, move the cursor to the desired Input Channel and Aux intersection, then edit the Send level or turn the currently-selected AUX Send on or off. Rotate the Parameter wheel or press the [INC]/[DEC] buttons to set the Send level, and press the [ENTER] button to turn the currently-selected Aux Send on or off. One of the following indicators appears, depending on the current Aux mode. • Aux Sends in Fixed mode A "FIX" indicator appears for On Aux Sends, and 8 a dot " . " appears for Off Aux Sends. Aux Sends • Aux Sends in Variable mode The current Send levels are displayed by the bar graphs. If the level is set to nominal (0.0 dB), "N" appears in the bar. The bars for Aux Sends that are set to off are highlighted. DM1000-Owner's Manual