Yamaha DM1000 Owner's Manual - Page 255
Creating a Custom Layer by Combining Channels (User Assignable Layer)
View all Yamaha DM1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 255 highlights
Creating a Custom Layer by Combining Channels (User Assignable Layer) 255 Creating a Custom Layer by Combining Channels (User Assignable Layer) If you set the Remote Layer target to "USER ASSIGNABLE," you can create a custom layer by combining any DM1000 channels (excluding the Stereo Out). This custom layer is called "User Assignable layer."You can use either Remote 1 or Remote 2 for a User Assignable layer. 1 Press the DISPLAY ACCESS [REMOTE] button, then press the [F1] or [F2] button. The Remote | Remote1 or Remote2 page appears. 2 Set the TARGET parameter to USER ASSIGNABLE, then press [ENTER]. A confirmation window appears. 3 Move the cursor to the YES button, then press [ENTER]. The DM1000 displays the page shown below. 1 4 Select the channels you wish to assign to the User Assignable layer using the 1-16 parameter boxes (1). You can store up to four 16-channel setups in four banks by switching Banks 1-4 via the BANK 1-4 buttons. Tip: You can reset the assignment to default by moving the cursor to the CLEAR button and pressing [ENTER]. 5 Use the LAYER [REMOTE 1] or [REMOTE 2] button to assign or recall the User Assignable layer. You can use the faders, Encoders, and [ON] buttons to control the assigned channels. Tip: If you connected an optional MB1000 Meter Bridge, its meters indicate the level of the channels currently-assigned to layer channels 1-16. 19 DM1000-Owner's Manual Other Functions