Yamaha DM1000 Owner's Manual - Page 226
TRANSMIT ENABLE/DISABLE, TIONS rotate the Parameter wheel to select MIDI, then press
View all Yamaha DM1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 226 highlights
226 Chapter 17-Remote Control 2 Press the DISPLAY ACCESS [SETUP] button repeatedly until the Setup | MIDI/Host page appears. 1 3 Move the cursor to the REMOTE 2 parameter box (1) in the SPECIAL FUNC- TIONS section, rotate the Parameter wheel to select MIDI, then press [ENTER]. If the MIDI port is already in use, a confirmation window for changing the assignment appears. Move the cursor to the YES button, then press [ENTER]. Tip: If the REMOTE 2 parameter box is grayed out, proceed to Steps 4 and 5 to set the TARGET parameter, then return to Steps 2 and 3. 4 Press the DISPLAY ACCESS [REMOTE] button, then press the [F2] button. The Remote | Remote 2 page appears. 5 Move the cursor to the TARGET parameter box, rotate the Parameter wheel to select USER DEFINED, then press [ENTER]. The confirmation window for changing the setting appears. Move the cursor to the YES button, then press [ENTER]. The display changes as follows: 1 3 4 2 5 6 7 A TRANSMIT ENABLE/DISABLE This button switches the MIDI Remote function between enable and disable. B INITIALIZE This button resets the settings stored in the bank selected by the BANK parameter to the default setting. C BANK This parameter enables you to select one of four banks. DM1000-Owner's Manual