Yamaha DM1000 Owner's Manual - Page 200
SOURCE MOVE TO MERGE TO Trim amount
View all Yamaha DM1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 200 highlights
200 Chapter 16-Automix • SOURCE section These parameters select the source Automix to be moved or merged. If you select CURRENT (the current Automix), you can use the MOVE button. If you select MEM (Automix memory), you can use the MERGE button. If you select MEM, specify the Automix memory number in the small parameter box on the right. • MOVE TO (MERGE TO) section - TIME This parameter specifies the start point to which the specified data is to be moved or merged. (The number in parentheses on the right indicates the end point of the destination.) You can also capture the start point on-the-fly by moving the cursor to the TO button, then pressing the [ENTER] button to capture the current position. To modify the captured positions, move the cursor to the value you wish to change, and rotate the Parameter wheel or press the [INC]/[DEC] buttons. Press the [ENTER] button to reset the currently-selected digit to "00." - CH This parameter specifies the channel to which the specified data is to be moved or merged. If multiple channels are selected as the move/merge source, use the CH parameter box to specify the number of the top channel in the destination. (The number in parentheses on the right indicates the number of the last channel in the destination.) For example, if eight channels are selected as the move/merge source and you specify "17" in the CH parameter box, the move/merge destination will be Channels 17 through 24. ■ TRIM This button enables you to adjust the level of fader events in the specified range of Automix data. When you select this Job, the TRIM EDIT section appears below the TIME SETTING section. - IN This parameter determines the time required for the fader to reach the level specified by the Trim amount parameter. - OUT This parameter determines the time required for the fader to return to the previous level. - Trim amount This parameter specifies the trim amount in the range of -96 dB to +96 dB. Existing data Trim: -x dB Trimmed data TRIM IN IN TRIM OUT OUT Time DM1000-Owner's Manual