Yamaha DM1000 Owner's Manual - Page 96
Setting Aux Send Levels, Using the Encoders
View all Yamaha DM1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
96 Chapter 8-Aux Sends Setting Aux Send Levels You can adjust the level of signals routed from Input Channels to the corresponding Aux Out (1-8). To do this, you can either use the Encoders on the top panel or set the parameters on the screen. Using the Encoders 1 Press the AUX SELECT [AUX 1]-[AUX 8] buttons to select the sends. 2 Press the ENCODER MODE [AUX] button. When the ENCODER MODE [AUX] button is turned on, you can rotate the Encoders to set Aux Send levels. 3 Select a layer that contains the source Input Channels, then rotate the corresponding Encoders. The DM1000 displays the Send level of the currently-selected channel. Note: If rotating the Encoders seems ineffective, check the Mode and Pre/Post parameters on the Aux | Send page (see page 97). DM1000-Owner's Manual