Yamaha DM1000 Owner's Manual - Page 33

Selecting Fader Modes 33 Selecting Fader Modes The function of channel faders (1-16) depends on the selected Layer and Fader mode. 1 Select a layer that includes the desired channel (see page 31). 2 Press the FADER MODE [FADER/AUX] button to select a Fader FADER MODE mode. • When the [FADER]indicator lights up You can use channel faders to FADER AUX 3 control Input Channel levels or Output Channel (Aux Out 1-8, Bus Out 1-8) master levels. Operating Basics • When the [AUX] indicator lights up You can use channel faders to control Input Channel Aux Send levels. The following table shows the channel fader functions for each Layer and Fader mode. LAYER buttons Fader Mode [1-16] button [17-32] button [33-48] button Fader Aux Fader Aux Fader Aux [REMOTE 1] button Fader Aux [REMOTE 2] button Fader Aux [MASTER] button Fader Aux Channel Strip Fader 1-8 9-16 Input Channels 1-16 level Input Channels 1-16 Aux Send level Input Channels 17-32 level Input Channels 17-32 Aux Send level Input Channels 33-48 level Input Channels 33-48 Aux Send level Operation depends on the selected target (see page 205). No operation No operation Operation depends on the selected target (see page 205). No operation No operation Aux Send master 1-8 output level Bus Out master1-8 output level No operation No operation Note: You cannot select Aux mode while the Master layer is selected. If you switch to the Master layer while the FADER MODE [AUX] indicator is lit, the indicator automatically turns off and the [FADER] indicator lights up. DM1000-Owner's Manual