Yamaha DM1000 Owner's Manual - Page 155

Scene Memories 155 14 Scene Memories This chapter describes Scene memories, which store DM1000 mix and effects settings. About Scene Memories Scene memories enable you to store a snapshot of DM1000 channel mix settings and internal effects processor settings as a "Scene" in a special memory area. There are 99 Scene memories, and you can recall any Scene using the display pages or the controls on the top panel. Tip: • You can also recall Scenes by replaying Automixes (see page 181) or by transmitting Program Changes from external MIDI devices (see page 239). • You can back up Scene memories to external MIDI devices by using MIDI Bulk Dump (see page 246). What is Stored in a Scene? The following parameter settings are stored in a Scene: Scene Mix parameters Effects parameters Remote Layer Scene settings Input Patching Output Patching Parameters All channel faders Channel to Aux Out 1-8 Send levels Aux Out 1-8 & Bus Out 1-8 levels All channel [ON] button settings All channel Phase & Delay settings All channel Attenuator settings All channel Compressor settings Input Channel Gate settings All channel EQ settings All channel Pan settings All channel routings Fader groups, Mute groups, EQ links, and Compressor links All channel pair settings Effect programs recalled for Effects processors 1-4 and their parameter settings Fader, Encoder and [ON] button status (only when Remote Control Target is set to USER DEFINED) Scene titles and Fade Time settings Input Patch library numbers Output Patch library numbers Note: • Scenes take a snapshot of Input and Output Patch library numbers that are in use at the time the Scene is stored, but exclude current (edited) Input and Output patching. • If you do not store the edited Input and Output patching to the libraries, recalling a Scene may change the current patching. Scene Memories 14 DM1000-Owner's Manual