Yamaha DM1000 Owner's Manual - Page 51
Analog I/O & Digital I/O, Analog Inputs & Outputs
View all Yamaha DM1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Analog I/O & Digital I/O 51 5 Analog I/O & Digital I/O This chapter describes the DM1000's analog and digital input/output connectors as well as the basic operations involving the digital I/Os. Analog Inputs & Outputs AD Input Section The DM1000's rear panel features Input connectors 1-16, which enable you to connect microphone and line-level sources, and OMNI IN connectors, which enable you to connect 5 line-level sources. Signals input at these connectors can be patched to Input Channels. (See page 105 for more information on patching Input Channels.) Analog I/O & Digital I/O • INPUT connectors 1-16 These balanced XLR-3-31-type connectors accept line-level and microphone signals. The nominal input range is -60 dB through +4 dB. 9 INPUT 8 • OMNI IN connectors 1-4 3 OMNI IN 2 These balanced XLR-3-31-type connectors accept line-level signals. The nominal signal level is +4 dB. • Phantom Power 1 +48V OFF ON Inputs 1 through 16 feature switchable +48V phantom powering for use with condenser-type microphones and direct boxes. Individual +48V [ON/OFF] switches on each input turn phantom power on and off. • PAD switches 1 PAD 20dB Inputs 1 through 16 feature pad switches, which attenuate input signals by 20 dB. • GAIN controls -16 -60 GAIN Inputs 1 through 16 feature rotary gain controls that adjust input sensitivity. Input sensitivity ranges from +4 dB to -40 dB when the Pad is on, and from -16 dB to -60 dB when the Pad is off. • PEAK & SIGNAL Indicators The SIGNAL indicator lights up when the input signal level is 20 dB PEAK below nominal. The PEAK indicator lights up when the input signal SIGNAL level is 3 dB below clipping. DM1000-Owner's Manual