Yamaha DM1000 Owner's Manual - Page 325
Appendix B: Specifications, General Spec
View all Yamaha DM1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 325 highlights
Appendix B: Specifications General Spec 325 General Spec Number of scene memories 99 Sampling Frequency Signal Delay Internal External fs=48 kHz fs=96 kHz 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz Normal rate: 44.1 kHz-10% to 48 kHz+6% Double rate: 88.2 kHz-10% to 96 kHz+6% Less than 1.6 ms CH INPUT to OMNI OUT Less than 0.8 ms CH INPUT to OMNI OUT Fader Fader Resolution Total Harmonic Distortion1 (CH INPUT to OMNI OUT) (Input Gain=Min.) fs=48 kHz fs=96 kHz Frequency Response (CH INPUT to OMNI OUT) fs=48 kHz fs=96 kHz 100 mm motorized with touch sense × 17 +10 to -138, -∞ dB input faders 0 to -138, -∞ dB master faders, stereo fader Less than 0.05% 20 Hz to 20 kHz @ +14 dB into 600 Ω Less than 0.01% 1 kHz @ +24 dB into 600 Ω Less than 0.05% 20 Hz to 40 kHz @ +14 dB into 600 Ω Less than 0.01% 1 kHz @ +24 dB into 600 Ω 20 Hz-20 kHz, 0.5, -1.5 dB @ +4 dB into 600 Ω 20 Hz-40 kHz, 0.5, -1.5 dB @ +4 dB into 600 Ω Dynamic Range (maximum level to noise level) 110 dB typ. DA Converter (OMNI OUT) 106 dB typ. AD+DA (to OMNI OUT) @ fs=48 kHz 106 dB typ. AD+DA (to OMNI OUT) @ fs=96 kHz -128 dB Equivalent Input Noise -86 dB residual output noise. OMNI OUT (STEREO OUT off) Hum & Noise2 (20 Hz-20 kHz) Rs=150 Ω Input Gain=Max. -86 dB (90 dB S/N) OMNI OUT Input Pad =0 dB (STEREO fader at nominal level and all CH INPUT faders at minimum level) Input Pad =0 dB Input Sensitivity -64 dB (68 dB S/N) OMNI OUT =-60 dB (STEREO fader at nominal level and one CH INPUT fader at nominal level) Maximum Voltage Gain 74 dB CH INPUT (CH1-16) to OMNI OUT (STEREO, BUS, AUX) Crosstalk (@ 1 kHz) Input Gain=Min. 80 dB adjacent input channels (CH1-16) 80 dB input to output Phantom switch +48 V DC Pad switch 0/20 dB attenuation Gain control 44 dB (-60 to -16), detented AD Input (1-16) Analog Input (OMNI IN 1-4) Peak indicator Signal indicator AD converter AD converter LED (red) turns on when post HA level reaches 3 dB below clipping at digital domain LED (green) turns on when post HA level reaches 20 dB below nominal at digital domain 24-bit linear, 128-times oversampling (fs=44.1, 48 kHz), 64-times oversampling (fs=88.2, 96 kHz) 24-bit linear, 128-times oversampling (fs=44.1, 48 kHz), 64-times oversampling (fs=88.2, 96 kHz) Option Input (SLOT 1-2) Available cards Optional digital interface cards (MY16, MY8, MY4 series) Digital Input (2TR IN DIGITAL 1-2) SRC On/off (1:3 and 3:1 maximum input to output sample rate ratio) DM1000-Owner's Manual