Yamaha DM1000 Owner's Manual - Page 308
DIST->DELAY, MULTI FILTER, One input, two output distortion and delay effects in series., Two input
View all Yamaha DM1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 308 highlights
308 Appendix A: Parameter Lists DIST->DELAY One input, two output distortion and delay effects in series. Parameter DST TYPE DRIVE MASTER TONE N. GATE DELAY Range DST1, DST2, OVD1, OVD2, CRUNCH 0-100 0-100 -10 to +10 0-20 0.0-2725.0 ms FB. GAIN -99 to +99% HI. RATIO FREQ. DEPTH 0.1-1.0 0.05-40.00 Hz 0-100% DLY.BAL 0-100% SYNC OFF, ON DLY.NOTE 1 MOD.NOTE 2 Description Distortion type (DST = distortion, OVD = overdrive) Distortion drive Master volume Tone control Noise reduction Delay time Feedback gain (plus values for normal-phase feedback, minus values for reverse-phase feedback) High-frequency feedback ratio Modulation speed Modulation depth Distortion and delay balance (0% = all distortion, 100% = all delayed distortion) Tempo parameter sync on/off Used in conjunction with TEMPO to determine DELAY Used in conjunction with TEMPO to determine FREQ. 1. tempo setting) 2. (Maximum value depends on the MULTI FILTER Two input, two output 3-band multi-filter (24 dB/octave). Parameter Range Description TYPE 1 TYPE 2 TYPE 3 FREQ. 1 FREQ. 2 FREQ. 3 LEVEL 1 LEVEL 2 LEVEL 3 RESO. 1 RESO. 2 RESO. 3 HPF, LPF, BPF HPF, LPF, BPF HPF, LPF, BPF 28.0 Hz-16.0 kHz 28.0 Hz-16.0 kHz 28.0 Hz-16.0 kHz 0-100 0-100 0-100 0-20 0-20 0-20 Filter 1 type: high pass, low pass, band pass Filter 2 type: high pass, low pass, band pass Filter 3 type: high pass, low pass, band pass Filter 1 frequency Filter 2 frequency Filter 3 frequency Filter 1 level Filter 2 level Filter 3 level Filter 1 resonance Filter 2 resonance Filter 3 resonance DM1000-Owner's Manual