Yamaha DM1000 Owner's Manual - Page 113
ON/OFF, ORDER, Press [ENTER] to confirm the change.
View all Yamaha DM1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
Insert Patching 113 B INSERT section • ON/OFF This button turns Insert on or off. • OUT This parameter enables you to select outputs, slot channels, or internal effects inputs as the Insert Out destination. • IN This parameter enables you to select inputs, slot channels, or internal effects outputs as the Insert In source. C COMP section • ON/OFF This button turns the compressor on or off. • ORDER This parameter determines the order of Insert patch and compressor when they are inserted at the same signal path point. With the "COMP → INS" setting, signals pass through the compressor first, then the Insert. With the "INS → COMP" setting, signals pass through the Insert first, then the compressor. 3 Move the cursor to the OUT parameter box, and rotate the Parameter wheel or press the [INC]/[DEC] buttons to select the desired outputs, slot channels, or internal effects inputs to be patched to Insert Out. The parameter indicators are explained below: Parameter values Description - S1-1-S116 No assignment Channels 1-16 of Slot 1 9 S2-1-S216 Channels 1-16 of Slot 2 Input & Output Patching OMN1-OM12 OMNI OUT connectors 1-12 2D1L & 2D1R 2TR OUT DIGITAL1 (L/R) 2D2L & 2D2R 2TR OUT DIGITAL2 (L/R) FX1-1-FX1-8 Inputs 1-8 of Internal Effects Processor 1 FX2-1 & FX2-2 Inputs 1 & 2 of Internal Effects Processor 2 FX3-1 & FX3-2 Inputs 1 & 2 of Internal Effects Processor 3 FX4-1 & FX4-2 Inputs 1 & 2 of Internal Effects Processor 4 4 Press [ENTER] to confirm the change. If you move the cursor to another parameter box or display another page before you press the [ENTER] button, all settings on this page will be cancelled. 5 Move the cursor to the desired IN parameter box, and rotate the Parameter wheel or press the [INC]/[DEC] buttons to select the inputs or slot channels to be patched to the Insert In. Refer to the explanation regarding the Input Patch for more information on the parameter values (see page 106). 6 Press [ENTER] to confirm the change. Tip: Move the cursor to an empty OUT or IN parameter box and press the [ENTER] button. The Patch Select window appears. Rotate the Parameter wheel or press the cursor buttons to select an item to be patched and press [ENTER]. Then, move the cursor to the YES button and press [ENTER]. The selected item is now patched. 7 To enable the specified Insert patch, move the cursor to the ON/OFF button in the INSERT section, and press [ENTER] to turn it on or off. DM1000-Owner's Manual