Yamaha DM1000 Owner's Manual - Page 63

Setting the Input Channels from the Display 63 B STEREO LINK This parameter's ON/OFF button enables you to pair gates for stereo operation even when the Input Channels are not paired. C CURVE This area displays the current gate curve. D TYPE This area displays the current gate type (GATE or DUCKING). Note: You cannot change the gate type on this page. To change the gate type, recall a program that uses the desired gate type from the Gate library. E Meters These meters indicate the levels of the post-gate signals and the amount of gain reduc- tion. 6 F ON/OFF The ON/OFF button turns the currently-selected Input Channel's gate on or off. G PARAMETER These controls enable you to set the gate parameters. (See page 320 for more information on the parameters.) Input Channels Tip: You can store the gate settings in the Gate library, which features preset programs that can be used for various applications (see page 174). Compressing Input Channels To set the Input Channel compressors, use the [SEL] buttons to select the desired Input Channel, then press the DISPLAY ACCESS [DYNAMICS] button, then the [F3] button to display the Dynamics | Comp Edit page. 2 3 4 1 5 6 7 A POSITION Use the Parameter wheel, or the [INC]/[DEC] buttons to select the position of the compressor within the channel from the following options: • PRE EQ Immediately before EQ (default) • PRE FADER Immediately before the fader • POST FADER Immediately after the fader B STEREO LINK This ON/OFF button enables you to pair compressors for stereo operation even when channels are not paired. DM1000-Owner's Manual