Yamaha DM1000 Owner's Manual - Page 98
Move the cursor to the FIXED or VARIABLE button in the MODE
View all Yamaha DM1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
98 Chapter 8-Aux Sends 3 Move the cursor to the FIXED or VARIABLE button in the MODE section for the currently-selected Aux Send to select a mode. • Fixed Mode In this mode, Aux Send levels are fixed at nominal (0.0dB). Also, channel ON/OFF buttons appear instead of the Send level rotary controls and PRE/POST buttons. • Variable Mode In this mode, Aux Send levels are variable and the signal source point can be either pre-fader or post-fader. Channel Send level rotary controls and PRE/POST buttons appear on the screen. Tip: You can select Variable or Fixed mode individually for each of the eight Aux Sends. Note: • In Fixed mode, all ON/OFF buttons are turned OFF. • When you switch toVariable mode, the signal source points are set to post-fader (PRE/POST buttons are set to POST), and Send level rotary controls are reset to -∞. DM1000-Owner's Manual