Yamaha DM1000 Owner's Manual - Page 230
When SW is assigned, LATCH
View all Yamaha DM1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 230 highlights
230 Chapter 17-Remote Control 9 Move the cursor to the LATCH/UNLATCH button, then press [ENTER] to select LATCH or UNLATCH depending on how you want the [ON] buttons to function. • LATCH Pressing the [ON] buttons repeatedly transmits alternating On and Off messages. • UNLATCH Pressing and holding down the [ON] buttons transmits On messages, and releasing the [ON] buttons transmits Off messages. Tip: Refer to the diagrams below for information on how the [ON] buttons behave when Latch or Unlatch is selected. ■ When "SW" is assigned: - LATCH MIDI data transmission (SW=7F) MIDI data transmission (SW=00) Off Illuminated Off - UNLATCH MIDI data transmission (SW=7F) MIDI data transmission (SW=00) Off Illuminated Off ■ When "SW" is not assigned: - UNLATCH MIDI data transmission Off Illuminated Off Tip: In most situations, select Unlatch if SW is not assigned. 10 To change the channel name, move the cursor to the ID LONG parameter box, then press [ENTER] to display the Title Edit window. See page 30 for more information on editing names. Tip: • Move the cursor to the INITIALIZE button, then press [ENTER]. A window is displayed that enables you to reset the parameter settings in the currently-selected bank. • You can also assign MIDI messages to the parameter boxes manually without using the LEARN button. DM1000-Owner's Manual