Yamaha DM1000 Owner's Manual - Page 136
MONITOR ALIGNMENT, Bus Out signals.
View all Yamaha DM1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 136 highlights
136 Chapter 11-Surround Functions • MONITOR ALIGNMENT You can adjust the Attenuator and Delay for each Surround Monitor Channel. This function is primarily used to correct the level difference and delay time among speakers. Move the cursor to the ATT or DLY parameter in the MONITOR FLOW section. The MONITOR ALIGNMENT diagram is displayed in the area below the section. Move the cursor to the ATT or DLY parameter box and edit the Attenuator or Delay value. The Attenuator parameters can be set to -∞ dB or from -12.0 dB to +12.0 dB in 0.1 dB steps. The Delay parameters can be set from 0.00 to 30.0 msec in 0.02 msec steps. Note: These parameter settings are effective only on the monitoring signals, not on normal Bus Out signals. Tip: You can store these settings in the Surround Monitor library. See page 179 for more information. DM1000-Owner's Manual