Yamaha DM1000 Owner's Manual - Page 83

Setting the Stereo Out and Bus Out 1-8 from the Display 83 Routing Bus Out 1-8 Signals to the Stereo Bus You can patch Bus Out 1-8 signals to Outputs and Slots 1/2, as well as to the Stereo Bus. You can adjust the level and pan settings of the signals routed to the Stereo Bus for each bus. This is convenient when you wish to use Bus Outs (1-8) as a Group Bus. To patch the Bus Out 1-8 signals to the Stereo Bus, press the SELECTED CHANNEL ROUTING [DISPLAY] button repeatedly to display the Routing | Bus To St page. 1 2 3 7 Bus Outs Move the cursor to the desired parameter you wish to change, then rotate the Parameter wheel or press the [INC]/[DEC] buttons to modify the setting. A TO ST PAN These controls pan the Bus Out 1-8 signals between the left and right Stereo Out buses. B TO ST ON/OFF These buttons turn on and off the Bus Out 1-8 to the Stereo Bus routing. C TO ST Faders These faders set the Bus Out 1-8 to Stereo Bus levels. Note: • The settings on this page do not affect the Bus output levels and on/off settings on the Master layer. • However, the Bus output levels and on/off settings on the Master layer affect the settings on this page. DM1000-Owner's Manual