Yamaha DM1000 Owner's Manual - Page 252
Prefer2 Initial Data Nominal, Meter Follow Layer, Scene MEM Auto Update, Joystick Auto Grab
View all Yamaha DM1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 252 highlights
252 Chapter 19-Other Functions • Initial Data Nominal If this check box is on, Input Channel faders are set to nominal (0 dB) when you recall Scene #0. • Meter Follow Layer If this check box is on, a connected optional MB1000 Meter Bridge automatically track a layer selection made in the LAYER section on the DM1000. • Scene MEM Auto Update If this check box is on, you can use the Scene Memory Auto Update function (see page 159). • Joystick Auto Grab If this check box is on, the [GRAB] button is automatically enabled and the Joystick is engaged in as the surround pan control when you move the Joystick pointer to the current surround pan position. • Cascade COMM Link If this check box is on, various functions and parameters are linked between cascaded DM1000s (See page 265 for more information on cascade connection). When the check box is off, only the Solo function is linked. • Auto Direct Out On If this check box is on and you change the channel Direct Out destination from "-" to any other output, the channel Direct Out is automatically enabled. If you change the channel Direct Out destination from an output to "-," the channel Direct Out is automatically disabled. Prefer2 page The Prefer2 page enables you to name the channel indicated on the display, and adjust the display brightness. 1 2 3 4 5 This page contains the following parameters: A Channel ID/Channel This parameter selects a style for displayed channel. If the Channel ID check box is selected, the Channel ID appears (e.g., CH1, BUS1). If the Channel Short Name check box is on, the Channel Short name appears (see page 249). B Port ID/PORT This parameter selects a format for the port name displayed on the pages. When the Port ID check box is on, the Port ID (such as AD1 or OMN10) appears. When the Port Short Name check box is on, the Short Port name appears (see page 250). DM1000-Owner's Manual